Galvanized Steel Clamps

US Duct Clamp 6" Industrial Dust Collection Pipe Clamp For Rolled End Of Fittings Featuring lever latches and foam seals, these clamps secure around the rolled ends of fittings and pipe. The quick lock duct clamp ring can achieve speed Install and disassembly of flange ducting. Quick Release Pipe Clamp With lever latches can quickly connect the ducts and pipes. Just need put the components inside of clamp and push the handle, the components will be connected. The Featuring

Galvanized Pipe Clamp With Gasket Round Ducting Quick Release Clamp Diameter 150mm Galvanized pipe clamp with gasket are used for flange ducting in dust collection system in woodworking shop or vacuum system like light particle conveying. The quick release handle mechanism creates a fast lock and disassembly and reduces installation time to almost half that of conventional methods of ducting. The gasket of TPE or rubber supply connection sealed. It provide optimal protection

Stainless steel 430 , 304 tube and pipe compression coupling for industrial vacuum system Introduction of compression couplings: Our tube and pipe compression coupling is designed for permanent installation to join pipe and tubing for pneumatic conveying system. The band type construction of our compression couplings holds the entire surface of the joint in uniform compression. Couplings are fabricated from heavy gauge zinc-plated steel – aluminum and stainless steel are also

Glavanized quick fit tube clamp with easy lever for ducting Description: Glavanized quick fit tube clamp is made of mild steel with zinc plated surface, stainless steel material version is available too, standard material thickness is 1.0-1.2mm, 2mm customized thickness could be met. This clamp have band width 28mm (or customized) , fit for standard flange pipe or tubing, the band design has V structure, U band clamp is available too for round lipped ducting pipe. Standard

Sheet Metal Carbon Steel 300mm Galvanized Steel Clamps Quick Pull Ring Description: The "300mm Galvanized Steel Clamps Quick Pull Ring" are made of carbon steel with superior white galvanization on the surface, thickness is from 1.0mm to 1.2mm, bandwidth 28mm, customized width is acceptable too, the handle is designed with quick release lock bolt system, make the connection easy and quickly, save more time. Material 300mm Galvanized Steel Clamps Quick Pull Ring Lock Quick

Circular 150mm Air Duct Clamp Quick Release Lever Clamp For Dust Collection Product description: The quick release lever clamp can achieve speed Install and disassembly of flange ducting. Quick Release Pipe Clamp With Handle and Inner Rubber Seal can quickly connect the ducts and pipes by handle lock mechanism. Just need put the components inside of clamp and push the handle, the components will be connected. The Quick Release duct Clamp With Inner Rubber Seal have good

Dust Collection Pipe Clamp Ring Carbon Steel Quick Release Duct Clamps 160mm As the important role of modular ducting for dust collection system, the slim clamping rings consist of galvanized carbon steel or stainless steel and connect pipe segments or pipe components with screws or lever fasteners. They are suitable for diameters ranging from 80mm to 600mm duct. Profiles could be manufactured according to specification provided by customers. Features of slim pull ring With

6" Dust Extraction Modular Duct Clamp With Gasket Galvanized Carbon Steel Pipe Clamp Clamp-together duct clamp were used in a wide variety of industries, from cement production to food and pharmaceutical manufacturing, in facilities of all sizes – from large manufacturing plants to small labs to one-person woodworking shops, almost anywhere de-dusting is required. The quick connect clamp in conjunction with the rolled ends or straight ends on components allow quick and easy

Glavanized steel metal clamps with adjustable lever lock latch We are offering wide range of Pipe Clamp, these are duly tested by our experts. Our clamps have won appreciation in terms of features like tensile strength, dimensional accuracy, resistance to corrosion and durability. Depending on the nature of application, We offer these clamps in relevant specifications Features: Quick release handle, quick fit, quick disassemble Practically leak-proof, air tightness Corrosion

Wide Spiral Round hot dipping air duct galvanized steel clamps for modular duct Round hot dipping air duct galvanized steel clamps is developed to provide a strong and leak free connection without the use of duct sealants. The round duct connector system consists of two mating round duct connector flanges with an integral mastic in the duct receiving pocket and a closure ring roll-formed from hot dipped galvanized steel. Features and benefits: Air-tight , efficient Simple

Clamp together ducting air clamps in galvanized for 1.0mm dust extraction ducing We manufacture modular ducting in galvanised steel, mild steel and stainless steel, along with a full range of ancillary fittings and components. like pressed bends ; straight duct pipe, rapid lock pull ring , wide rings, slim rings, flanges,sliding dampers/blast gate in manual and pneumatic, butterfly dampers, clip bands, branch and trouser pieces, throttle valves, diverters, pipe couplings, and

v band galvanized quick release duct hose clamp V band galvanized duct hose clamp is made of mild steel with zinc plated surface, stainless steel material version is available too, standard material thickness is 1.0-1.2mm, 2mm customized thickness could be met.This clamp have band width 28mm (or customized) , fit for standard flange pipe or tubing, the band design has V structure, U band clamp is available too for round lipped ducting pipe.Standard gasket TPE or Silicone

Adjustable galvanized ducting clamp for dust collection pipe Features: Quick release handle, quick fit, quick disassemble Practically leak-proof, air tightness Corrosion Proof Re-usable Locking Pin for secure tight Description: 1. Galvanized ducting clamp is made of mild steel with zinc plated surface, stainless steel material version is available too, standard material thickness is 1.0-1.2mm, 2mm customized thickness could be met. 2. This clamp have band width 28mm (or

100mm Heavy duty double bolt 2mm tube galvanized steel clamp for pneumatic conveying Description: 1. Heavy duty double bolt 2mm tube galvanized steel clamp is made of mild steel with zinc plated surface, stainless steel material version is available too, standard material thickness is 1.5mm, 2mm customized thickness could be met. Fit for standard flange pipe or tubing, the band design has V structure, U band clamp is available too for round lipped ducting pipe. Standard

160mm Quick latch flange round duct galvanized steel clamps Galvanized steel clamps is made of mild steel with zinc plated surface, stainless steel material version is available too, standard material thickness is 1.0-1.2mm, 2mm customized thickness could be met with band width 28mm (or customized) , fit for standard flange pipe or tubing, the band design has V structure, U band clamp is available too for round lipped ducting pipe, Standard gasket TPE or Silicone rubber,

Quick Release custom galvanized steel clamps for spiral duct Description: Material Carbon steel Bandwith 28mm Lock Quick handle Specification 75mm-650mm 1. Galvanized steel clamps is made of mild steel with zinc plated surface, stainless steel material version is available too, standard material thickness is 1.0-1.2mm, 2mm customized thickness could be met. 2. This clamp have band width 28mm (or customized) , fit for standard flange pipe or tubing, the band design has V

150mm Galvanized steel clamps for duct fittings with handle and gasket Description: 1. Galvanized steel clamps is made of mild steel with zinc plated surface, stainless steel material version is available too, standard material thickness is 1.0-1.2mm, 2mm customized thickness could be met. 2. This clamp have band width 28mm (or customized) , fit for standard flange pipe or tubing, the band design has V structure, U band clamp is available too for round lipped ducting pipe. 3.

Carbon Steel Wide Tension Clip For Dust Collection Round Ductwork 150mm - 600mm OEM Size As Request The wide pull ring is made of superior carbon steel with electro-galvanzing and structured by 1 piece or 2 pieces of bands with bolt connection. It can be open and closed easily without any tools. Wide clamp used for connection of duct of 1mm or 1.2mm. widely applied in dust collection, air filtration, and particle conveying. Specification of wide clamp ring: ɸD PRODUCT CODE A

100mm Round Ductwork Split Pipe Hanger Galvanized Carbon Steel Hanging Bracket OEM Accept Split hangers can be crafted from many different materials, but quality hangers will be made from carbon steel, hot-dipped galvanized steel, or stainless steel. They also come in a wide range of sizes. The pipe hanger on show is made of 2mm carbon steel and done electro-galvanzing, which is rust-proof and cost-effective. Band width is 28mm, M8 Or M10 Nuts. OEM design and size can be

Galvanized Steel Pipe Hanger With M8 Nuts For Industrial Round Duct 80mm-400mm OEM Accepted Steel pipe hanger is supplied from dia. 80mm up to 400mm. ( Please check our followed specification list for detailed size) Our this hanging bracket is made of 2mm carbon steel and done electro-galvanzing, which is rust-proof. Band width is 28mm, M8 Or M10 Nuts. OEM design and size can be supplied as request. Specification of pipe hanger: øD MM PRODUCT CODE A MM H MM THICKNESS MM 80